Demag chain hoist with balancer function
Grip control
- The load can be controlled very easily with the D-Grip Servo control handle.
Load positioning
- By switching over to “load positioning mode”, the operator can grasp and guide the load directly with light pressure.
Assembly mode
- High level of safety and precision for assembly operations, since any oscillation and uncontrolled load movements are suppressed.
Load pick-up mode
- Load handling attachments can be lifted and pre-tensioned
- Load can be removed without dropping or sudden upward pull
- Protection for jigs and machinery. The balancer only lifts until a preset force is reached.
Product information
The benefits at a glance
In comparison with the proven DCM-Pro with two lifting speeds, the DCMS-Pro offers you further benefits.
Maximum ease of operation
- Infinitely variable speed control for lifting and lowering motions over the entire load range
- Exceptionally fine control at slow speed
- Smooth starting and exact positioning
- Creep lifting speed from 0.15 m/min
- Lifting speed, acceleration and braking ramp can be simply modified via the control unit
- Suitable for right-hand and left-hand operation
Versatile performance
- The various Manulift load handling attachments can be changed with ease
- Pro-Hub function for up to 90 per cent higher nominal speed for partial load or no-load operations
- Automatic switchover to creep lifting speed before the upper/lower limit positions are reached – speed ratio 1:100
High safety and reliability
- Motor temperature monitoring device
- Acceleration and braking ramps to reduce load sway
High safety and reliability
DCBS core functions
- Lifting and lowering by manual force on the control handle
- Manipulating loads
- Protection against slack chain
- Protection against snatching loads
- Movements can be stopped if loads fluctuate widely
- Monitoring/reducing load capacity
High safety
- Low-wear brake thanks to regenerative braking
- No need to adjust the brake
- Brake arranged before slipping clutch in the drive arrangement (no load slipping)
- Automatic braking if a malfunction occurs
- Slipping clutch with automatic cut-out by means of speed monitoring (no continuous slipping)
- Gearbox, slipping clutch and brake maintenance-free for up to 10 years
- Safety-related functions satisfy at least Performance Level c and Category 2 to EN ISO 13849-1
Features
- Operating limit switches (upper/lower)
- Elapsed operating time counter
- Installation transparency thanks to operating data interface (IDAPSY)
- External sensor in the load-bearing arrangement
- Applications:
- lifting masts,
- manipulators,
- customer-specific load attachments
- Applications:
Simple installation
- “Plug & Lift” electric connections
